Pemberitahuan untuk semuanya bahwa sekarang aktifitas blog saya alihkan

Kunjungi blog saya yang baru ya gan rifainews.com
Get Paid To Promote, Get Paid To Popup, Get Paid Display Banner

End Stage assembling computers


Replace the chassis cover by sliding
connect the cable from the power supply into the wall socket.
Connect the monitor to the video card port.
Connect the phone cable into the modem port if any.
Connect the keyboard cable connector and plug the mouse into the mouse port or serial poert (depending on the type of mouse).
Connect other external devices such as speakers, joystick, and microphone if there is to the appropriate port. Check the manual of the adapter cards to ensure the port location.
Testing
The new computer is assembled can be tested by running the BIOS setup program. How to do a test with the BIOS program as follows:
Turn on the monitor and system unit. Note the display monitor and the sound from the speakers.
Fost of the BIOS program will automatically detect the installed computer hardware. If there are errors then display a blank screen and the speaker sounds a beep on a regular basis as an indication of error codes. Check reference BIOS code to find an error indication is meant by the beep code.
If no error occurs then the monitor displays the execution of the POST program. BIOS interrupt key ekan according to the instructions on the screen to enter the BIOS setup program.
Check all the hardware detection by the BIOS setup program. Some settings may have changed in value, especially the capacity of hard drives and boot sequence.
Save changes to the settings and exit the BIOS setup.
After exit from the BIOS setup, the computer will load the Operating System with appropriate search order settings in the BIOS boot sequence. Insert Bootable Diskette or CD containing the operating system to drive the search.
Handling Problems
A common problem in computer assembly and handling, among others:
Computer or monitor is not lit, probably due to the switch or power cord not connected.
Card adapter is not detected due to the installation of not fitting into the card slot /
LED of the hard disk, floppy or CD burning continue due to wiring error or a pin connector that fits yet connected. Congratulations and Good Trying Helpful.

Klik Di sini untuk mendapatkan Backlink Gratis berkualitas --------------------------------------------------->>> Free Automatic Backlink Best Backlinks daily Bookmarks Free 1000 Backlinks Auto Dofollow Backlinks Backlinks Builder Dofollow Backlinks Free Hundred Backlinks Ping your blog, website, or RSS feed for Free
Loading....

0 komentar:

Post a Comment

 
Design by Mercedes-Benz Mobil Mewah Terbaik Indonesia | Bloggerized by Free Blogger Templates | Free Samples