Several types of chassis is equipped with power supply. When the power supply has not included the way the installation as follows:
Enter the power supply on the shelf at the back of the casing. Connect the four locking screws.
Connect the power connector from the power supply to the motherboard. ATX power connector types have only one way of installation so as not to be reversed. For non-ATX type connectors with two separate cables then black ground must be placed side by side and mounted in the middle of the motherboard power connector. Connect the power cord for the fan, if you use the fan for cooling the CPU.
Enter the power supply on the shelf at the back of the casing. Connect the four locking screws.
Connect the power connector from the power supply to the motherboard. ATX power connector types have only one way of installation so as not to be reversed. For non-ATX type connectors with two separate cables then black ground must be placed side by side and mounted in the middle of the motherboard power connector. Connect the power cord for the fan, if you use the fan for cooling the CPU.
0 komentar:
Post a Comment