Memory modules are installed sequentially from the smallest socket number. The order of installation can be seen from the diagram motherboard.Setiap types of memory modules SIMMs, DIMM and RIMM can be distinguished by the position of grooves on the sides and bottom of the modul.Cara install for each type of memory module as follows.
Type SIMMs
Adjust the position of grooves on the module with the bumps in the slot.
Insert the module with a sloping 45-degree angle to the slot
Push the module straight up in the slot, the locking lever on the slot will automatically lock the module.
Type DIMM and RIMM
How to install the DIMM and RIMM modules together and there is only one way that will not be reversed because there are two grooves as a guide. DIMM and RIMM difference in the position of the curve
Lay locking catches on the end slot
adjust the position of the curve on the connector module with bumps in the slot. and enter the module into the slot.
Hook lock automatically locks the module in the slot when the module is just installed.
Type SIMMs
Adjust the position of grooves on the module with the bumps in the slot.
Insert the module with a sloping 45-degree angle to the slot
Push the module straight up in the slot, the locking lever on the slot will automatically lock the module.
Type DIMM and RIMM
How to install the DIMM and RIMM modules together and there is only one way that will not be reversed because there are two grooves as a guide. DIMM and RIMM difference in the position of the curve
Lay locking catches on the end slot
adjust the position of the curve on the connector module with bumps in the slot. and enter the module into the slot.
Hook lock automatically locks the module in the slot when the module is just installed.
0 komentar:
Post a Comment